5 Laws Everybody In Repairs To Upvc Windows Should Know
5 Laws Everybody In Repairs To Upvc Windows Should Know
Blog Article
Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.
It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.
Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. However, if you have double pane windows that are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.
It's a good idea to tape the gap once the glass has been removed. This will stop water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.
To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in place.
If you can't reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also loosen. This is usually due to screws that have become undone over time, but it can also be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.
3. Water Leaks
If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer is applied. It glazing repair near me is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.
Verify that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious cases, you may need to replace the window.
Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or if it opens with a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is an easy procedure, but it is simpler when you have a person to help hold the frame up.
Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you advice.
It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a variety of various factors. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.
These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the risk of draughts.
Another, and most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric that are filled with some type of filler. They can be positioned on top of your windowsill. They will help block out cold air and keep your home warm and cosy!
With a little regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it may be cheaper to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.